To seal penetrations of the roof by equipment, __________ is installed under the roofing material and up the s?

To seal penetrations of the roof by equipment, __________ is installed under the roofing material and up the sides of the equipment

1. flashing
2. decking
3. jointing
4. glazing

Flashing

powered by Yahoo Answers

All terrain forklift carries Sod and Roofing Shingles in Mud



Posted in Roofing Materials

4 Responses to “To seal penetrations of the roof by equipment, __________ is installed under the roofing material and up the s?”

  1. Chuck says:
    April 9, 2009 at 11:23 am

    Flashing
    References :

  2. Brad says:
    April 9, 2009 at 11:28 am

    Is this a pop quiz for us today? LOL
    References :

  3. rolsenn2003 says:
    April 9, 2009 at 11:50 am

    I think the answer to your question is 1. flashing. However the way you worded it is deceptive. The flashing should be woven into the roofing material and typically you do not run a flashing up the sides of equipment.

    typically you would set the equipment on a coping that counter-flashes the flashing. In the case of Built up roofing you would lay the cap sheets over the primary flashing and strip the secondary flashing over the cap sheets and under the top layer.
    References :

  4. smokey says:
    April 9, 2009 at 11:57 am

    don't you just hate home work?
    References :

Leave a Reply